[Autoterm/Planar] Pre-Start Engine Heater AUTOTERM FLOW 5D-DIESEL 12V
The Binar/Autoterm Flow is a compact and efficient pre-start engine coolant heater. It works independently from the engine. The Binar Flow heats up the engine coolant to provide an easy start at low temperatures. At the same time, it will supply hot air to the passenger cabin/compartment keeping it warm and dry. Will work in extreme temperatures up to -45 degrees C.
Heaters BINAR/Autoterm 5D (diesel) has a programmable start and stop control and automatically maintains pre-set engine and cabin temperature.
Benefits of the Flow:
- Compact & can be mounted in the vertical and horizontal position
- Can work as a supplementary heater
- Can be controlled by Timer-control (included in the standard kit)
Refer to the operation manual for installation and operation procedures. This kit comes with everything needed for installation.
12 V | |
---|---|
Heat Output; kW (BTU): | 5.0 (17,000) |
Fuel: | Diesel |
Fuel Consumption; l/h (gal/h): | 0.62 (0.16) |
Nominal Supply Voltage; V: | 12 |
Operating Voltage; V: | 9.5…16 |
Power Consumption; W (A): | 7.30 (6.0) |
Coolant: | Antifreeze |
Weight (with the kit); KG: | 8.0 |
Weight | 10.0 kg |
---|---|
Dimensions | 55 × 39 × 15 cm |
Type |
DIESEL |
Controller |
PU-27, PU-28 |
Please Note: This video was made for the European Market- North America DOES not offer the cue modem to start the motor at this time!