Skip to content
[HEOSolution] MERCEDES Sprinter 2018-24 FRONT DOOR Lock Set [13856]

[HEOSolution] MERCEDES Sprinter 2018-24 FRONT DOOR Lock Set [13856]

by Expedition Upfitter
$302.00 - $302.00
$302.00
$302.00 - $302.00
$302.00

This is a set for a Mercedes Sprinter 2018-2024

Driver and Passenger side door locks will fit 2018-2024

Kit Contains:

  • 2x Locks for Driver and Passenger doors (1x left, 1x right). Installed on the inner frame of the door. Push the knob down and turn it to close or open the door, use the key to secure it.
  • All locks are lockable & are keyed the same!
  • Easy to install
  • Tools needed for installation- 3.2 mm drill bit to drill pilot holes, Phillips screwdriver to tighten screws! DO NOT USE an impact drill or anything other than a screwdriver to tighten screws
  • All black powder-coated metal
  • HeoSafe Solutions uses the highest quality materials, designed and manufactured in Europe. These Security Locks are suitable for use on many caravan and motorhome doors. We currently only carry stock for Transit and Sprinter vans. If you require another lock for a different vehicle please contact us.

 

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
Y
Young Park
Great customer service

At first, I was frustrated with driver side door lock fitting issue but they were very patient and supportive. You know, in life, how easy it is to point fingers. Turned out that it was m6 fault that our van's plastic trim for driver side seat belt cover was not installed correctly. Finally, they were able to point that out and my installation is completed. Thank you,

Thanks for sharing your story! We’re so happy we could help you figure things out and get your installation finished. Appreciate your patience and understanding! Glad everything's working great now. 😊

J
Jeremy Bell
Good Enough

The lock itself Mounts perfectly and is very stable. However the receiver plate for the throw bolt just screws into the plastic trim. It’s a little wobbly and I have to pull on the door handle to make it latch. I would be willing to cit the plastic to have it mount to a metal surface. I will likely fabricate something in the future. Definitely can’t get the door open when locked!!

Thanks for your feedback!
We’re glad the lock mounts well and is stable. We appreciate your notes on the receiver plate and understand your concerns. Your suggestion about mounting it to a metal surface is helpful. If you need any advice or support, feel free to reach out!
Jonathan

T
Tracy Mitchell
Front door locks for inside

My brother in law helped me install in just over an hour. The locks seem quality, they work well and are doing the job that I needed them to do

P
Philip
Tools secure

I'm an electrician and finally, I have some peace of mind when I'm out at a job site that my tools will be here when I get back! Great locks.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare