Skip to content

[Autoterm] Diesel Air Heater 2D-12 High Altitude

Original price $1,194.00 - Original price $1,393.00
Original price
$1,194.00
$1,194.00 - $1,393.00
Current price $1,194.00

Diesel Air Heater Autoterm 2D-HA comes with a controller, basic installation kit and Operational Manual. The heater is equipped with a self-adjusting system for operations at high altitudes (up to 2500 m / 8200 ft!)

This version is designed / powered to heating up to 25ft. power boats, commercial trucks, buses, vans and motorhomes.

Product Highlights:

High Altitude ready: Designed with the adventurer in mind, the Planar 2D-12 HA is meticulously calibrated for high altitude performance, ensuring your comfort is never compromised, no matter how elevated your journey gets.

Efficient Heating Solution:

    • Heat Output: Delivers a powerful 0.8 kW (2,700-6,850 BTU) heating performance, creating a cozy and warm interior environment efficiently.
    • Fuel Efficiency: With a modest fuel consumption rate of 0.10-0.24 l/h (0.03-0.06 gal/h), it offers an economical way to stay warm, reducing your environmental impact and operating cost.

Versatile Control Options: Choose between manual dial, advanced digital, or touch screen digital controllers. Each option offers simplicity and precision in operation, with features like the 7-day timer and temperature settings to tailor your heating experience.

Comprehensive Kit Included: Comes with a standard installation kit featuring an inline metering fuel pump, fuel line, exhaust and intake components, a remote wired controller, and all necessary fasteners and brackets, ensuring a hassle-free setup.

Quiet and Reliable: Designed to operate quietly, it enhances your living or working space without the disturbance of loud operational noise. Backed by a 2-year warranty on parts and labor for peace of mind.

Specifications:

    • Nominal Supply Voltage: 12 Volt
    • Power Consumption: 10-29 W (0.8-2.42 A)
    • Airflow Rate: 34-75 m³/h
    • Dimensions: 324 x 118 x 119 mm (L x D x H)

As per the instruction manual, the heater has to be connected directly to the battery to avoid any voltage drops/surges. NO Alteration to the wiring harness is permitted. 

WARRANTY : 2 Years on Parts and Labor. Contact us if you have any concern or queries.

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tyler S.
Toasty!

This heater works way better than my older Espar unit did, and its cheaper. I bought this and installed in a Front Runner Wolf Pack. They stack a bit easier. I knew I would be installing this permanently in another vehicle at some point, and just recently did so. It is now heating my Conqueror UEV 490 and it keeps it to about 64 degrees on a 10 degree night. A little insulation on the floor will help that right along. I highly recommend the Planar units, and Expedition Upfitter is very kind and responds quickly to questions.

S
Sebastian T
Great product and customer service

Had several conversations with Andreas at Expedition Upfitter before placing my order. I would highly recommend listening to his recommendations! There is a lot of good info.
In any case, the turn around time was great. The package really contains everything needed to successfully install the heater. Although, everything worked out just fine, I got a bit frustrated with the instructions that came with it... a quick phone conversation with Andreas helped a lot! It would also be nice if Planar would come up with a nicer end cab on the exhaust pipe...

Basti, Bozeman MT

T
Tony S.
Planar Heater

I have to say I am super impressed with the Planar heater, it is so toasty in our truck in a matter of minutes and the Total Composites body holds the heat so well. It is a far cry from an Airstream in -20C with a standard furnace with ice on the inside of the windows and going through a 30lb tank of propane in a day if you can actually sleep over the noise of an LP furnace!!! The Planar heater is super quiet and super easy to install!

Hello Tony, Yes we love the Planar as well! So easy to use!

B
Ben L.
Planar Heater

I installed it myself!! I was pretty worried about this as its not really my jam but with the instructions and help from Andreas I was able to do it! It works better than expected.

Planar all the way!

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare